Hi everybody, while waiting for parts for my next project to arrive, im gonna give a little tutorial on how to reset the canon g2010 printers waste ink counter.im pretty sure anybody who owns a G2010 printer will face this problem sooner or later.so lets get to it.
Download the file. For the location where the file is saved, check the computer settings. Double-click the downloaded.exe file. It will be decompressed and the Setup screen will be displayed. Follow the instructions to install the software and perform the necessary settings. HERE IS THAT DOWNLOAD LINK -Canon Resetter G1010 / G2010 / G3010 / TS series One PC Multi Time Reset ST 5103 Its a solfware for resetting ink counter and adjustment program, If you dont know the sequence dont buy, once it book and send download link it cannot be refund 100% GUARANTEED If Service Mode Locked/Blocked Service Tool Not Work.
narmenia
Getting Fingers Dirty
- Joined
- Jun 22, 2006
- Messages
- 41
- Reaction score
- 1
- Points
- 22
not sure if this can RESET other SIMILAR canon printers from different regions... i have successfuly reset the waste ink counter on my Canon ip4680
DOWNLOAD links:
UPDATED links
http://www.multiupload.com/D79Z6MF212
Multiupload.com
GUIDEReset can be done once your printer is on Service Mode:
a. Switch Off the Printer
b. Hold the Resume Button
c. Switch On and Hold the Power Button
d. Release the Resume Button
e. Press the Resume Button Twice
f. Release the Power Button
By this time your printer is in service mode already.
Run the Service Tool Program (Resetter)
Select ASA as the Region (for ASIA PACIFIC - depends on your location)
Set Clear Waste Ink Tank, select Main & Platen
Click Cleaning 1 (Printer will print)
Then Click Main and Platen
the tools that you need to do this can be downloaded here :
CANON G2010 SERVICE TOOL
Download and extract using WinRAR or any aps that support unzipping file archive.
Canon G2010 problem code 5B00 mean the waste ink counter overflow, you should be reset Canon G2010 Waste Ink Counter (clear Waste Counters). The printer will blink as follow: Orange light – 7 times. Alternatively Green (Power) and Orange.
And computer show up problem “SupportCode: 5B00”
Canon Resetter Service Tool Download
Now , enter Canon G2010 service mode:
How to put Canon G2010 printer in service mode :
Step 1: Turn off Canon G2010 printer
Step 2: Press and hold printer’s RESET button
Step 3: Press and hold printer’s POWER button.
Step 4: Released printer’s RESET button, POWER still pressed
Step 5: Press and released Canon G2010 printer’s RESET button 5 times @ 6 times (Bypass scanner)
Step 6: Released Canon G2010 printer’s POWER button:
Now, Canon G2010 printer on SERVICE MODE condition. In this condition, computer detect found new hardware.
Step 7: When computer detect FOUND NEW HARDWARE, press CANCEL
Run the service tool that we downloaded earlier..click on 'Accept'
Now click 'Start' under the Canon Tool
Now click the service tool in the number order...after clicking '1' the printer will print some number code, make sure the printer is loaded with 1 piece of paper.
After clicking '2' the printer will move it printhead a few times, just wait until it stop.
After clicking '3' the printer will print status sheet.
and you are all done, just restart the printer and you can print normally again.
Now check Canon G2010 printer status in Control Panel, If it shows “Printer is online“, your Canon G2010 printer is ready to print – no errors – no waste Counters Overflow.